NiCr- CuNi thermocouple (Type E)

NiCr- CuNi thermocouple (type E) is also named NiCr- Constantan thermocouple. The main chemical composition of positive leg NiCr (EP) is Ni: Cr≈90:10; negative leg Constantan (EN) is Cu: Ni≈ 55%: 45%. Although EN, TN, JN are all called Constantan, EN and TN don not give the same EMF output curve as JN. EN and TN are able to interchange but they are not interchangeable with JN. The operating temperature range of type E thermocouple is -200~900℃.

Category:

Thermocouple Wire

Key word:

Thermocouple Wire

Mail: info@rgalloy.com

huaxinalloy@gmail.com

WhatsApp: +86-13776873278

Skype: joe-yuanxinming

FEEDBACK

Product Details

Type E thermocouple has the largest EMF output and highest sensitivity, so it is ideal for measuring small temperature change. It also has good stability in the low temperature range up to 300℃, and good property of anti-corrosion in humidity atmosphere. It is recommended for oxidizing or inert atmospheres, but cannot be used directly in reducing atmosphere and atmosphere with sulphur gases.

TYPE	Chemical Composition%
TYPE	Ni	Cr	Cu	Si	Al
EP	90	10	/	/	/
EN	45	/	55	/	/

Standard：IEC60584-1

TYPE	EMF Versus Pt.67(mV)
TYPE	100℃	200℃	400℃	600℃	800℃
EP	2.784~2.844	5.938~6.002	12.709~12.819	19.537~19.699	26.102~26.308
EN	3.467~3.543	7.410~7.492	16.109~16.255	25.362~25.588	34.664~34.960
Ep-EN	6.251~6.387	13.348~13.494	28.818~29.074	44.899~45.287	60.766~61.268

PhysicalProperties:

Type	Density at 20℃ （g/cm³）	Melting point （℃）	Tensile Strength(Soft annealed condition in 20℃)（Mpa）	Elongation(Soft annealed condition in 20℃)（%）	Resistivity at 20℃ (μΩ.m)
EP	8.5	1427	≥490	≥10	0.71
EN	8.5	1220	≥390	≥25	0.50